What is Azote?
AZOTE is high quality foams with special expansion process of polyethylene resin.
Polyethylene is very historical material that was invented in 1933, also it is the most familiar dissolved in the life In modern times. AZOTE uses 2 types of different characteristics polyethylene resin.
| 1.Low-density polyethylene
Low-density polyethylene (LDPE) is used as a general purpose polyethylene foam. The characteristics of LDPE are a bulk density material has excellent impact resistance, cold resistance, chemical resistance, water resistance, low electrical properties in high soft resin because it has a long side chain |
 |
| 2. High-density polyethylene
High-density polyethylene (HDPE) foaming process is difficult in general method of chemical foaming. LDPE according to the characteristics of impact resistance, cold resistance, chemical resistance, water resistance, etc., High-density polyethylene (HDPE) is a rigid material. Compared to conventional polyethylene foam, it can be obtained foam with stiffness. |
 |
AZOTE series product range is apparent density from 15kg/m3 up to 45kg/m3.
It is separated into different types as follows.
- General type（LD-15, LD-24, LD-33, LD-45)
- High strength and high load type（HD-30, HD-80）
- Flame-retardant type（LD-24FR, LD-33FM
- Antistatic / conductive type（LD-30SD, EV-45CN）
The basic color is black and white. Only to LD-33, there are seven-color white, black, gray, red, blue, green, and yellow.
| Part No. | Type | Apparent density | Color | Effective Dimensions |
| LD-30SD | static dissipative | 30kg/m3 | black | 32mm × 1000mm × 1900mm |
| LD-15 | general | 15kg/m3 | white・black | 49mm × 1000mm × 2000mm |
| LD-24 | general | 24kg/m3 | white・black | 47mm × 1000mm × 2000mm |
| LD-33 | general | 33kg/m3 | white・black・gray・blue・red・yellow・green | 27mm × 1000mm × 2000mm |
| LD-45 | general | 45kg/m3 | white・black・pink・blue | 27mm × 1000mm × 2000mm |
| HD-30 | high‐temperature ・high‐strength | 30kg/m3 | white・black | 27mm × 1000mm × 1500mm |
| HD-80 | high‐temperature ・high‐strength | 80kg/m3 | black | 27mm × 1000mm × 1500mm |
| LD-24FR | incombustibility | 24kg/m3 | charcoal | 29mm × 1000mm × 1500mm |
| LD-33FM | incombustibility | 33kg/m3 | black | 27mm × 1000mm × 2000mm |
| EV-45CN | conductivity | 45kg/m3 | black | 25mm × 950mm × 1430mm |
| EV-50 | general | 50kg/m3 | white | 27mm × 1000mm × 2000mm |
What is ZOTEK?
ZOTEK, engineering plastic foam, is high-performance foam obtained from nylon resin and polyvinylidene fluoride resin.
ZOTEK series is divided into a PVDF type of ZOTEK F series and Nylon type of ZOTEK N series.
ZOTEK F series product range is apparent density from 30kg/m3 up to 75kg/m3. As a concrete lineup, there are 3 products F-30, F-40HT, F-75HT.
ZOTEK N series is NB-50 only. Apparent density is 50kg/m3.
- Polyvinylidene fluoride
One of the resin having a fluorine in the molecule, its features are
- Excellent thermal stability during processing and fabrication
- Wide temperature range（-50～150℃）
- Excellent chemical resistance
- Excellent weather resistance
- Superior abrasion resistance
- Superior mechanical property
- Superior Electrical property
- Superior gas barrier property
It is an excellent material that is used in many areas such as chemical machinery, packaging materials, coated cables, batteries, paints, films, etc.
2. Nylon
An engineering plastic which was invented in 1934.
It has long history in nylon resin, excellent in heat resistance and cold resistance and chemical, which is widely known material for goods to building materials, electrical parts, general machinery parts.
ZOTEK Product List
| Apparent density | Color | Effective Dimensions |
| 30kg/m3 | white | 23mm × 1000mm × 2000mm |
| 30kg/m3 | white | 23mm × 1000mm × 2000mm |
| 40kg/m3 | white | 23mm × 1000mm × 2000mm |
| 50kg/m3 | black | 29mm × 950mm × 1950mm |
